• Cabinet makers: take 20% off with code CABINET20

Built for cabinet makers

Stop letting a $2 plastic plate ruin a $20,000 kitchen.

Hide-A-Trim flush mount outlet and switch kits sit dead level with your panel and take your finish. Paintable, adjustable, and installed in minutes by the same crew that hangs your doors.

Claim 20% off

  • Paintable & stainable face
  • Adjustable depth
  • Standard devices
Custom kitchen island with a flush mounted outlet hidden in the cabinetry panel

20%

off for cabinet shops

  • The usual outcome

    Your millwork, interrupted

    You spend weeks matching grain across an island panel. Then the electrician surface mounts an off-white plate on it. The designer notices. The homeowner notices. You get the call — and it was never your scope.
  • With Hide-A-Trim

    One continuous surface

    The kit installs into the panel and finishes flush, so the outlet reads as part of the cabinet instead of hardware bolted onto it. You control the finish, the placement and the result — before the panel ever leaves the shop.

    Claim 20% off

Why shops specify it on every island

  • Disappears into your millwork

    A paintable, stainable flush face that finishes level with the panel. No proud plastic plate breaking the grain of a custom island end panel.

    Minutes per opening, not an afternoon

    Route, drop in, secure, finish. Your finish carpenter installs it without a specialty tool or a second trip from the electrician.

  • Adjustable depth, real-world tolerances

    Built to adapt to your material thickness and the electrician's rough-in. No re-routing, no shimming, no callbacks.

    A billable upgrade, not a cost

    Shops routinely charge a premium for flush electrical on islands, pantries and appliance garages. The kit pays for itself on one opening.
Claim 20% off

Kits for the work you actually do

THE CABINETRY LINE

View all

Four steps your bench guys already know

  • 01

    Rout the opening

    Use the supplied dimensions to cut a clean opening in your panel.
  • 02

    Set the frame

    Drop in the kit and adjust it flush to the finished face.
  • 03

    Finish it

    Paint, stain or laminate the trim so it reads as one continuous surface.
  • 04

    Electrician terminates

    Standard device, standard wiring. Nothing unfamiliar for the trade.
Claim 20% off
  • The usual outcome

    20% off your first Hide-A-Trim order

    Try it on one island. Apply code CABINET20 at checkout — it beats our standard trade discount and applies to the full cabinetry line.
    Claim 20% off

Questions from the shop floor

Does the 20% stack with the PRO10 trade discount?


No — CABINET20 replaces PRO10 and saves you more. Use code CABINET20 at checkout for the full 20% off your order.

Will it work with my panel thickness?


The cabinetry kits are adjustable, so they accommodate a wide range of
finished panel and applied-trim thicknesses. Stone and tile versions are
available for waterfall and backsplash work.

Can the trim be painted or stained?


Yes. The face is designed to be finished in your shop — prime and paint
it with the cabinet, or finish it to match a stained species.

Is it code compliant for an electrician to terminate?


The kit uses standard devices and standard boxes, so your electrician
terminates as they normally would. Always confirm with your local
inspector.

Do you sell to shops in volume?


Yes — Hide-A-Trim works with cabinet shops and dealers directly. Place an order with the code, or ask about dealer registration.

Claim 20% off

Finish the outlet like you finish the cabinet.

20% off with CABINET20. Ships direct to your shop.

Claim 20% off
  • Claim your discount

    Get your 20% off code sent to your shop

    Tell us a little about your shop and we'll send your CABINET20 discount plus cabinetry spec sheets. No obligation, no sales calls you didn't ask for.

  • © 2026 Hide-A-Trim. Flush mounted solutions.