This Kit is designed to be installed by:
First: The electricians receive the kit(s), inspect it for correct contents, and give the faceplate to the construction supervisor/manager.
Second: Drywall installer
Third: Stone Installer
Stone Installation Instructions
- The baseplate should be given to the marble manufacturer to cut the correct size opening in the marble. The machine DXF file is available on our website for stone-cutting facilities with waterjet machines.
- Remove the adhesive strip protection from the Raco box and install the box on the base plate’s back side.
- Use the supplied Gorilla Glue to adhere the base plate to the backside of the marble surface.
- Install the wiring and device.
- Install the protection plate.
- When all the work is finished, replace the protection plate with the finished face plate.
Hide-A-Trim products are designed for installation by everyday electricians and carpenters. Instructional videos and presentations show how simple it is to get the desired results utilizing regular resources.
NOTE: If a custom finish is required, take pictures as outlined on our website. Keep a sample of the tile and the cutout piece. Fill out the form on www.hideatrim.com. Send the sample to the following address:
Hide-A-Trim
Nassco Products LLC
2460 NW 17th Ln, Unit 4
Pompano Beach FL 33064